EVG Quicktronic Professional T E 2x18
EVG Quicktronic Professional T/E Automatic safety shut down with defective bulb and at the end of the bulb's lifespan Automatic turn on after bulb change Approval mark: ENEC-10-mark, VDE-mark, EMV-mark Additional characteristics: EOL-mark, cut-off mark Immunity against 3 kV impulse voltage Application data: Dimmable: no Bulb start: start with optimal coil preheating within about 1 s General descriptive data: Construction form / design: EVG Standard Standards: - Safety according to EN 61347-2-3 / IEC 61347-2-3 - Bulb operation according to EN 60929 / IEC 61547 - Noise suppression according to EN 55015 / CISPR 15 - Line current harmonics according to EN 61000-3-2 / IEC 61000-3-2 - Immunity, stability according to EN 61547 Energy Label - EEI: A2 Technology - electrical specifications: Operating frequency: ≈ 44 Hz Mains frequency: 50-60 Hz TH half-life width: 200 µs Bulb output: 2 x 16.5 W Output factor c: 0.98 Supply voltage/rated voltage: 220-240V Outgoing voltage: 330 V DC voltage (direct current range): 176 - 276 V, bulbs must be ignited above 198 V IP inrush current: 20 A Max. number EVG for circuit breakers 10A: 16 Max. number EVG for circuit breakers 16A: 28 Voltage stability: 300 V - permanent / 320 V - 48 h / 350 V - 2h Technology - temperatures: max. casing temperature in the event of an error: 110 °C max. operating temperature at Tc-point: 75 °C Surrounding temperature range: -20 - +50 °C Storage temperature: -40 - 85 °C Humidity: 5 - 85 % (max. 56 d/y at 85% )
