Paulmann MaxLED 250 base set IP44 RGBW ZigBee 5m
Dimmable LED strip MaxLED 250 in basic set with ZigBee-compatible dimming/switching controller and power supply unit, RGBW color change Everything needed for integration into a smart home system is already included in the basic set of the LED strip MaxLED 250 RGBW. Both the power supply and connectivity are taken care of, as this practical set includes a power supply unit and a ZigBee-based dimming and switching controller in addition to the LED strip. Due to plug-in connections, the installation is quickly done and on top of that MaxLed is protected against splashing water. A separate bridge is required to dim the brightness and adjust the light color. The smik gateway from Paulmann, which is available separately as an accessory, offers a free app for Android and iOS. This also allows it to be paired with Amazon Alexa to control everything via voice commands. However, integration into an existing ZigBee-enabled smart home system from other manufacturers is also possible. With the remote control Gent or the 2-gang wall switch from Paulmann on ZigBee basis, the intelligent light control is again possible without additional bridge. Only the control via app must be waived in this case. These so-called smart home hand transmitters are also available separately via the accessories. Technical features / compatibility: - Complete set incl. LED strip and power supply - Expandable (see accessories) - ZigBee 3.0 compatible - compatible with Paulmann smart home remote control and wall switch (see accessories) - compatible with smart home systems based on ZigBee such as Philips Hue or IKEA Tradfri - dimmable and light color adjustable (after integration into a smart home system) - adhesive back, plug-in system for easy installation and can be shortened as required - flexible material for use on flat or curved surfaces Note: To use the intelligent light control (dimming, color change, operation via app, etc.), a separate ZigBee remote control is required.) a separate ZigBee bridge or a ZigBee handheld transmitter is mandatory (see accessories)
