Rademacher RolloPort SX5 DuoFern garage door drive
RolloPort SX5 DuoFern garage door drive - for the radio control of up-and-over and sectional doors The RolloPort SX5 is a garage door motor with an integrated DuoFern radio receiver. It is suitable for up-and-over and sectional doors and provides a flexible option for installation due to the drive unit that can be rotated by 90°. Thanks to the toothed belt drive, it runs particularly quietly and has a reliable power transmission. The integrated display shows the status and any errors. The RolloPort SX5 has many functional and practical features that guarantee convenient and reliable functionality. For example, the drive has automatic door closing and a safety return when approaching an obstacle as well as an internal emergency release for manual control in the event of a power failure. An adjustable closing time (automatic closing after a certain time) and an alarm function (beep when the door is open continuously for an extended period) are available as security functions. In addition, the RolloPort SX5 can be connected to the HomePilot® central control unit, which allows you to monitor the status and make settings via the app at any time and from anywhere when it is connected to the Internet. Functions / compatibility: - Control via HomePilot® or via the free HomePilot app - Voice control via Google Assistant and Amazon Alexa possible - Incl. two handheld transmitters - Obstacle detection - Emergency release in the event of a power failure - Number of directly connected DuoFern participants: max. 20 Technical information: - Output: 150 W - Tensile force: max. 900 N / 90 kg - Door speed: UP 11 / 15 / 19 cm/s + DOWN 11 cm/s - Maximum lifting height: 255 cm - Maximum door size: 12.5 m - Minimum drop: 5 cm - Transmission frequency: handheld transmitter: 433 MHz rolling code - Transmission frequency of device: 434.5 MHz - Radio range: outdoors around 50 m, in the building around 30 m (depending on the building fabric) - Ambient temperature during use: -10 °C to + 40 °C HomePilot® is necessary for smart control. Included: - 1 x drive - 1 x user manual - 2 x handheld transmitters - 1 x door tie, curved - 1 x centre suspension - 3 x mounting brackets - 1 x camber angle - 1 x door angle - 1 x multi-tooth connector - 8 x hexagonal self-tapping screws (6 x 15 mm) - 1 x screw (6 x 80 mm) with a hexagonal nut and a protective sleeve - 1 x bolt (8 x 20 mm) - 1 x safety splint (2 x 20 mm) - 4 x screws (8 x 20 mm) with a hexagonal nut and a washer - 6 x rawlplugs (10 mm) - 6 x hexagonal screws (8 x 60 mm) - 1 x impact mandrel - 2 x perforated tape angles - Three-part track and two connectors - 1 x external release
