Rademacher RolloTron Comfort DuoFern Plus
App-controllable RolloTron Comfort DuoFern 1805 Plus belt winder with a maximum tensile force of 60 kg The RolloTron Comfort DuoFern Plus belt winder can easily be installed in conventional shutter boxes with a width of 3.6 cm or more. It is extremely easy to use thanks to the self-explanatory keys and the bright, intuitive display. If additional DuoFern devices are registered, the shutter drive can serve as a control unit to direct automatic commands to all the receivers. Furthermore, connection to the HomePilot® control unit is possible thanks to the radio interface, allowing the belt winder to be controlled via the system’s user interface or via the free app on your smartphone. Up to 20 DuoFern devices can be integrated in just a few steps. Access to a wide range of practical functions means that all the shutters in the house can run through fully automatic scenes, from a daily programme to a weekend programme. The belt winder can also respond reliably to altered lighting and air conditions caused by sunlight or a change in the weather. If HomePilot® is connected to an Internet router, the belt winder can even be controlled by voice control via Google Home or Amazon Alexa or by app control when you are out and about. Functions / compatibility: - Control via HomePilot® or via the free HomePilot app - Voice control via Google Assistant and Amazon Alexa possible - Manual control via the control keys and display is possible at any time - Maximum number of connected DuoFern devices: 20 - Installation wizard - Long-term data storage even in the event of power failure - Individually adjustable motor speed (e.g. for noise reduction) Technical information: - Transmission frequency: 434.5 MHz - Tensile force: 60 kg - Belt width: 23 mm - Winding capacity: 15 m (belt thickness 1.0 mm), 12 m (1.3 mm) - Maximum permissible shutter area: around 10 m² (shutter weight of 4 kg/m²) or around 6 m² (7 kg/m²) - Radio range in the building: 10 to 15 m - Connection via a power plug - Ambient temperature during use: 0 to 40 °C HomePilot® is necessary for smart control.
