Solar pond pump system Roma LED
Roma LED: extensive pond pump system for lighting effects and different fountains Solar pond pump system Roma LED consists of various components, which can shed the right light on your garden pond and produces different fountains. Roma LED comes with a 35 Wp solar module, two different sprinklers (three-tier fountain or water bell), four risers, a submersible pump, a battery box and an LED light ring. The six white LEDs have a twilight sensor and can simultaneously recharge the battery in sufficient sunlight. The pump can be set to different modes. When set to run permanently, the pump runs until the battery is completely discharged. In timer mode the pump switches on every hour for ten minutes. Thus, the pump can run in the evening or during the night. In charging mode, the battery charges when the pump is switched off and can then be turned on via the switch in the evening. The pump system can be used in a pond as well as for the water supply of rock fountains. In addition to the 18 V output for the connection of the pump, the battery box also features an additional 6 V output, which can be used to connect a pond ventilator or light, for example. The four risers (each 8.5 cm in length) and two sprinklers can be used to create fountains in different forms and heights, with a maximum height of 1.8 m. Technical data Solar module: - Dimensions - length 62 cm, width 45.5 cm, height 2.5 cm - Weight: 2.9 kg Pump: - Operating voltage: 17 VDC - Flow rate: max. 1700 l/h - Cable length 5 m - Max. water depth: 2 m - Hose output: 13 mm - Dimensions - length 24.3 cm, width 20.5 cm, height 11.1 cm - Weight excluding cable: 1.24 kg - Recommended pond size 1,000 to 3,000 l Battery box: - Battery: lead gel 12 V/12 Ah - Max. solar module capacity: 50 Wp - Dimensions - length 20 cm, width 16.5 cm, height 13.5 cm - Weight: 4.5 kg Energy efficiency class:A+
