Tecka LED solar lantern teak Duratec grey 39 cm
Elegant teak LED solar lantern Tecka with Duratec coating Stylishly designed LED solar lantern Tecka was made of the finest teak wood and frosted acrylic. Thanks to the Duratec coating, the exterior of the lantern convinces with a high-gloss surface, because the processed wood is reproduced in sunlight color- and light-fast. In addition, the housing is resistant to chemicals and has a high impact resistance. The lantern has a handle with which it is excellent to carry and vary the positioning as needed. Tecka combines high-quality materials with the latest technology. The built-in solar and LED modules provide reliability, performance and good illumination. When the sun is shining, the Tecka can be charged via the solar panel - otherwise charging is possible via the USB cable. The LED lantern has three different setting modes. - 1st mode: The parameters of power consumption, power reserve and dark time, on which the brightness of the LEDs is based, are monitored so that the light can remain on all night. - 2nd mode: light sensor is on and automatically turns the light on at dusk and off at dawn. Motion sensor is also on and the light shines at full power for 30 seconds when motion is detected. - 3rd mode: the light is on continuously and can burn up to 5 hours when fully charged. The light intensity can be adjusted individually, extending the burn time up to 200 hours. The motion sensor is off. - Sensor range motion sensor: 6 m, detection range: 120°.
