Theben thePiccola S360 100 DE motion sensor white
Passive infrared motion detector thePiccola S360-100 DE for installation in the ceiling With a detection angle of 360°, thePiccola S360-100 DE passive infrared motion detector covers a detection area of approx. 50 m² at a radius of 8 m. It enables automatic, presence and brightness dependent lighting control. The ceiling opening should have a diameter of 34 to 36 mm. The detector is operated fully automatically, is preset and therefore immediately ready for operation. A test mode is possible to check the function and detection range. The following remote controls are suitable for controlling the detector: User remote control the Senda S, Service remote control theSenda P, App remote control the Senda B. They must be ordered separately if required (see Accessories). - Mounting height: 2 to 6 m - Brightness adjustment range: 5 to 1,000 Lux - brightness switching value adjustable, teach-in function - Pulse function for staircase lighting time switch - Light run-on time adjustable: (pulse 0.5 s), 30 s to 30 min - Mixed light measurement suitable for fluorescent lamps (F/PL/ESL), halogen/ incandescent lamps and LEDs - Incandescent/halogen lamp load: 2,000 W - Fluorescent lamp load (VVG) not compensated: 2,000 VA - Fluorescent lamp load (VVG) parallel compensated: 1.300 VA 140 µF - Fluorescent lamp load (VVG) series-compensated: 2,000 VA - Fluorescent lamp load (EVG): 1,200 W - LED lamp 2 W: 600 W - Channel A Light: relay, 230 V - Extension of the detection range by master/slave circuit - Ambient temperature: - 20 °C to + 50 °C - Protection class IP44 (sensor), IP20 (power section)
