Theben theRonda S360 101 UP presence sensor white
For flush-mounted ceiling installation: passive infrared presence detector theRonda S360-101 UP TheRonda S360-100 passive infrared presence detector is ideal for automatic lighting control based on presence and brightness. It is installed in the ceiling by means of a recessed box (Ø 55 mm, NIS, PMI) and has numerous useful functions. With a coverage angle of 360° and a radius of up to 9 metres, it covers an area of approx. 64 m². If necessary, the detection zone can be reduced using the clips included in the delivery. The predefined values and settings can only be changed using a suitable remote control. These are available via the accessories - User Remote Control theSenda S, a Service Remote Control theSenda P, the App Remote Control theSenda B. A connection possibility for push-buttons or switches for manual switching with automatic recognition "push-button/switch" is available. - Mounting height: 2 to 4 m - Own consumption: ~ 0.1 W - Brightness setting range: 30 to 3,000 Lux, permanently on - Light follow-up time: Impulse (0.5 s), 10 s - 60 min - equipped with pulse function for staircase lighting timer - Channel A Light: relay, 230 V - fully automated operation - Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/ incandescent lamps and LEDs - brightness switching value adjustable, teach-in function - Short-term presence adjustable - Presence switch-on delay: 0 s to 10 min - Presence follow-up time: 10 s to 120 min - Test mode to check function and detection range possible - Incandescent/halogen lamp load: 2,300 W - Fluorescent, compact/fluorescent lamps: 1,150 VA (cos φ = 0.5) - Inrush current: max. 800 A/200µs - LED lamp 2 W: 600 W - Connection via screw terminals - max. wire cross-section: 2 x 2.5 mm² - Ambient temperature: -'15 °C to + 50 °C - Protection class: IP54 (when installed)
